Standard and detection methods for nitrogen gas diaphragm compressor products
A nitrogen separator compressor is a device used to compress nitrogen from a low pressure area to a high pressure area. This compressor is widely used in many fields, such as the chemical industry, petrochemical industry, medicine and food processing. Therefore, in order to ensure the performance and quality of nitrogen diaphragm compressor, corresponding product standards and test methods must be developed. The product standards and testing methods of the nitrogen-gas diaphragm compressor will be introduced below.
一． Product standard for nitrogen gas diaphragm compressor
The product standard of nitrogen diaphragm compressor is a necessary condition to ensure its safety, performance and quality, which is generally divided into the following aspects:
1. Product model and performance
The model of equipment shall clearly indicate the technical parameters, implementation standards and safety standards, including nitrogen pressure range, compression ratio, exhaust pressure and other parameters, to ensure the stable performance and meet user requirements.
2. Structure and manufacturing standards
The structure of the nitrogen diaphragm compressor shall be reasonably designed, and the manufacturing process shall meet the relevant national standards to ensure the strength, tightness and corrosion resistance of the equipment.
3. Power standards
The electrical performance of the nitrogen diaphragm compressor shall meet the national safety standards, and the high and low voltage control system shall be reliable to prevent over-pressure or under-pressure of the equipment.
4. Operation and maintenance standards
The nitrogen diaphragm compressor shall be equipped with the operation manual and maintenance manual of the nitrogen diaphragm compressor manufacturer to ensure the normal operation and maintenance of the equipment.
5. Safety and performance standards
The nitrogen separator compressor shall meet the relevant national safety standards and shall be equipped with the necessary safety facilities to ensure the safety of the operators.
二． Detection method for nitrogen gas diaphragm compressor
The detection of nitrogen diaphragm compressor is the key link to ensure the performance and quality of the equipment. Here are several common test methods:
1. Nitrogen gas leakage test
When running the nitrogen diaphragm compressor, to ensure its air tightness. If the equipment leaks, it will cause an unnecessary waste of energy and nitrogen.
2. Stress test
To ensure the normal operation and safety of the equipment, the pressure and temperature of the nitrogen diaphragm compressor shall be tested and recorded.
3. Pressure resistance test
In the production of nitrogen diaphragm compressor, pressure test should be conducted to ensure the stability and reliability of equipment.
4. Vibration test
Because the nitrogen diaphragm compressor is compressed by vibration, the vibration test should be conducted to ensure its vibration stability before use.
sum up: The product standard and testing method of nitrogen separator compressor are important conditions to ensure the performance and quality of the equipment. Meeting the above standards and using the above testing method can ensure the normal operation and safety of the equipment. At the same time, the decision to use the dry diaphragm nitrogen compressor, often than the liquid ring nitrogen compressor energy saving and more reliable, and more convenient to use.